SMART series of blowing machine fills the gaps in field of domestic high-speed linear blowing machine. Currently, China linear single-mold speed still stays around 1200BPH, while international max single-mold speed has reached 1800BPH. High-speed linear blowing machines rely on imports. In view of this situation, Faygo Union Machinery developed China first high speed linear blowing machine: FG6 whose single-mold speed can reach 1800 BPH. FG6 has 6 cavities, production capacity is 9600 BPH. It is developed totally independently, has our own intellectual property rights, and has obtained more than 8 national patents.
This machine is equipped with automatic perform loading and bottle unloading system. It is applicable for all shapes of drinking water bottles, carbonated bottles and hot filling bottles. FG4 is composed of three modules: prefrom elevator, perform unscrambler and host machine.
FG6 is a completely new generation of linear blowing machine, distinguished by its high speed, low power and low compressed air consumption, featured by the excellent structure design, small space occupation, less noise and high stability, meanwhile conforms to national beverage sanitary standards. This machine symbolizes the highest level of national linear blowing machines. It is the ideal bottle making equipment for medium and large enterprises.
FG Series Product Advantages:
1. Servo driving and cam linking blowing section:
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement, equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.
2. Small performs distance heating system
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.
Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
3. Efficient and soft perform inlet system
By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protected.
4. Modularized design conception
Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.
FG4 Optional items:
1. Exploded bottles ejection unit
During the blowing process, if the bottle burst, bad bottles can be automatically removed. This prevents the bad bottles from entering the filling machine.
2. HP air recovery system
After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement.
3. Oven and preform temperature detection system
Detection system detects temperature of oven and the temperature of performs. When the preform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.
| Model |
FG6 |
Remark |
| Mold number(piece) |
6 |
|
| Capacity(BPH) |
9600 |
|
| Bottle specification |
Max volume(mL) |
2000 |
|
| Max height(mm) |
328 |
|
| Round bottle max diameter(mm) |
105 |
|
| Square bottle max diagonal(mm) |
115 |
|
| Preform specification |
Suitable inner bottle neck(mm) |
20--25 |
|
| Max preform length(mm) |
150 |
|
| Electricity |
Total installation power(kW) |
74 |
|
| Heating oven total power(kW) |
69 |
|
| Heating oven real power(kW) |
40 |
|
| Voltage/frequency(V/Hz) |
380（50Hz） |
|
| Allowed voltage fluctuation range |
±10% |
|
| Compressed air |
Pressure(bar) |
30 |
|
| Air consumption（m³/min） |
5.5 |
|
| Cooling water |
Mold water |
Pressure(bar) |
4-6 |
Water chiller
(6HP)
|
| Temperature regulation range(°C) |
6--13 |
| Flow rate(L/min) |
45 |
| Oven water |
Pressure(bar) |
4-6 |
Water chiller
(3HP)
|
| Temperature regulation range(°C) |
6-13 |
| Flow rate(L/min) |
22 |
| Machine specification |
Machine dimension(m)(L*W*H) |
4.3X1X2.3 |
|
| Machine weight(Kg) |
4000 |
|
Note: the parameter above is based on the 17 grams of 500mL PET bottles. If the bottle conditions change, the corresponding parameter will change also. With the development and innovation of technology, the data above may be changed or improved, so it is for reference only. For precise and detailed data, please consult our technical department.
